Manuals & Technical Guides
Equipment Manuals and Technical Guides
▶ Gland Nut Adjustment Guide, standard guns pre 2015
▼ The following issues can be related to an improperly adjusted gland nut:
- Cannot adjust spray pattern (Loosen nut)
- System continuously sprays solution (Loosen Nut)
- Needle stuck and will not move (Loosen Nut)
- Trigger stuck, no movement, or sticks (Loosen Nut)
- Leakage from the Gland Nut (Tighten Nut Carefully)
- When adjusting the Gland Nut, do so very carefully, in small 1/16 increments. Do not over tighten, as nut can be damaged or stripped.
- Gland Nut Adjustment Sheet (Standard guns, pre 2015): CLICK HERE
▶ Standard and Pro Tip and Needle Removal Guide, Metal Needles only
▼ Click link below to download a copy of the Earlex Needle Removal Sheet.
Maximist Standard gun, Pro Needle (metal needles only) Removal Guide: CLICK HERE
If only cleaning current needle (not replacing) do not discard any parts. Wipe needle with a soft cloth under warm water, and replace old needle back into gun.
A gun that spits, or splats, or will not spray solution, should be well cleaned, including removal and cleaning of the needle. If problem continues, check needle for damaged or broken tip, or grooves.
▶ Ultra Premier, Ultra Pro Manuals
▼ Ultra Premier Product Manuals: CLICK HERE
Ultra Pro Product Manuals: CLICK HERE
Maximist Pro Gun Parts Breakdown Sheet: CLICK HERE
Progun Cleaning Guide - CLICK HERE
▶ Qube Manuals
▼ Click below link to download a copy of the Maximist and Maximist Pro equipment user manual. Maximist Pro Gun Parts Breakdown Sheet: CLICK HERE
Progun Cleaning Guide - CLICK HERE
▶ Maximist Evolution TNT and Evolution Pro Equipment Manual
▼ Click below link to download a copy of the equipment user manual.
Maximist TNT and Maximist Pro Product Manual: CLICK HERE
TNT Gun reset (if gun spits or cannot be adjusted see this guide) - CLICK HERE
Maximist Pro Gun Instructions and Parts Breakdown Sheet: CLICK HERE
Progun Cleaning Guide - CLICK HERE
Dial Base Setting on unit (if unit shuts down unexpectedly, see this sheet) - CLICK HERE
▶ Maximist, XL, GEM and Maximist Pro Equipment Manual
▼ Click below link to download a copy of the Maximist and Maximist Pro equipment user manual.
Maximist XL and Maximist Pro Product Manual: CLICK HERE
Maximist Pro Gun Parts Breakdown Sheet: CLICK HERE Progun Cleaning Guide - CLICK HERE
▶ Spraymate and Lite Plus Equipment Manual and Tech Sheets
▼ Click below link to download a copy of the Maximist Spraymate equipment user manual.
Lite Plus Product Manual: CLICK HERE
Spraymate Product Manual (Standard gun 2014 and earlier): CLICK HERE
Spraymate TNT Product Manual (TNT gun 2015 and later): CLICK HERE
TNT Gun reset to Factory Default (if gun spits, splatters, cannot be correctly adjusted, or for use whenever gun is disassembled to reset): CLICK HERE
Spraymate Pro Product Manual (Pro gun 2015 and later): CLICK HERE
Maximist Pro Gun Parts Breakdown Sheet: CLICK HERE
Progun Cleaning Guide - CLICK HERE
▶ Maximist Pro TNT Product Manuals
▼ Pro TNT : CLICK HERE
Gun reset to Factory Default (if gun spits, splatters, cannot be correctly adjusted, or for use whenever gun is disassembled to reset): CLICK HERE
▶ Maximist Allure Product Manuals
▼ Product manuals for Allure units:
Allure Xena Gun or Standard Gun : CLICK HERE
Gun reset to Factory Default (if gun spits, splatters, cannot be correctly adjusted, or for use whenever gun is disassembled to reset): CLICK HERE
▶ Apollo T6000 Mist Applicator Gun Parts Diagram (For Minimist T100/T200)
▼ Click below link to download a copy of the Apollo T6000 Parts Diagram.
Apollo T6000 Parts Diagram: CLICK HERE